Çatı İzolasyonu

Çatı İzolasyonu
Çatı İzolasyonu Çatı İzolasyonu Çatı İzolasyonu Çatı İzolasyonu Çatı İzolasyonu Çatı İzolasyonu Çatı İzolasyonu
Marka: Faris
Ürün Kodu: Product 17
Kazanacağınız Puan: 700
Stok Durumu: Stokta var
Miktar:  
   ya da   
0 yorum  0 yorum  |  Yorum Yap

Application of Underlays


This summary provides a short description of roof underlays sold by Masterplast Group to find the most appropriate solutions for different fields of application. Our company offer a wide range of products from traditional non-vapour per-meable underlays to vapour-permeable membranes manufactured with the newest technology and also vapour control layers used. The most important rules of planning and construction are summarized below. Since all variations of end-using of the products can not be anticipated, the designer/end-user's responsibility to make sure of the suitability of this underlay for particular purposes. This summary does not substitute the application guidelines and technical datasheets of these products issued by MASTERPLAST GROUP INTERNATIONAL.

 

Vapour permeable underlays for discontinuous roofings (according to: EN 13859-1)

 

FIELD OF APPLICATION: Used as a subsidiary protective layer against moisture (liquid water penetration, wind-blown snow) and wind in pitched roof structures. These products are laid directly over the thermal insulation, timber boarding or other solid support, paralell to the eaves with minimum 10 –15 cm overlapping and the printed or coated side to the roofing. The underlay is fixed along the rafters with proper counter battens (min. 50/50 mm). These battens lift the tiling battens off the underlay, create an effective drainage path to the eaves and a ventilation gap between the eaves and the ridge. Sealing of the overlaps with MASTERMAX TAPE encreases the wind-tightness.

 

TYPES OF UNDERLAYS:
DIFOIL-S
MASTERMAX 3 ECO, MASTERMAX 3 CLASSIC, MASTERMAX 3 TOP, MASTERMAX 3 EXTRA,
MASTERMAX PRO, MASTERMAX THERMO (SA)
Underlays for walls: (according to: EN 13859-2)
FIELD OF APPLICATION: Vapour-permeable underlay for walls. Used as a vapour permeable air barrier - with sealed
overlaps - and insulation scrim in ventillated facade structures with closed joints.

 

3D corner picture

TYPES OF UNDERLAYS:
WINDMAX

01– Roofing;
02– Tile batten;

03– Counter batten;
04– Mastermax underlays;

05– Thermal insulation among the rafters;                              
06– Additional thermal insulation under the rafters;
07– Wooden or metal support;
08– Vapour control/vapour barrier layer;
09– Wall finishing (e.g., gypsum plasterboard);
10– Rafter;
11– Ventilating tile;
12– Ridge tile;

 

 

 

 

MICROPERFORATED AND NON-PERFORATED UNDERLAYS FOR DISCONTINUOUS ROOFINGS (according to: EN 13859-1)

 

FIELD OF APPLICATION: Used as a subsidiary protective layer against moisture (liquid water penetration, wind-blown snow) and wind in ventilated pitched roof structures. These products are laid paralell to the eaves with minimum 15 cm overlapping, with printed or coated side to the roofing. The underlay is fixed along the rafters with counter battens (min. 50/50 mm), that lift the tiling battens off the underlay and create an effective drainage path to the eaves. Proper ventila-tion gap between the underlay and the thermal insulation is necessary! The airflow in this ventilation gap transports the vapour - diffusing across the thermal insulation - to the ventilating tiles or ridge.

 

TYPES OF MICROPERFORATED UNDERLAYS (with moderate vapour-permeability for discontinuous roofings)
MASTERFOL SOFT MP, MASTERFOL CLASSIC MP, ISOFLEX SOFT MP

TYPES OF NON-PERFORATED UNDERLAYS (not vapour-permeable underlays for discontinuous roofings)
MASTERFOL SOFT W, ISOFLEX SOFT, ISOFLEX CLASSIC, ISOCON, ISOCON PRO, ISOCON EXTRA

TYPES OF NON-PERFORATED, METALISED UNDERLAYS (not vapour-permeable underlays for discontinuous
roofings. The metalised surface reduces the heat stress of the roof structure. These products can be also used
as vapour control layers or vapour barriers)
MASTERFOL SOFT ALU, ISOFLEX ALU, ISOFLEX ALU LP, ISOFLEX ALU LP 2

3D corner picture

 

01– Roofing;
02– Tile batten;
03– Counter batten;
04– Masterfol and Isoflex underlays;                                 
05– Thermal insulation among the rafters;
06– Additional thermal insulation under the rafters;
07– Wooden or metal support;
08 – Vapour control/vapour barrier layer;
09– Wall finishing (e.g., gypsum plasterboard);
10– Rafter;
11– Ventilating tile;
12– Ridge tile;

 

 

 

 

 

 

Vapour control layers, vapour barriers (according to: EN 13984)

 

FIELD OF APPLICATION: Installed behind the internal wall finishing (e.g. plasterboard), it minimises the passage of vapour through the structure, also reduces the air-infiltration and heat losses. The air- and vapourtight sealing of the overlaps with Isoflex TAPE and jointings with Masterfol vapour-barrier adhesive is neccessary!

TYPES OF VAPOUR BARRIERS (SD>100M)):
MASTERFOL BLUE
ISOFLEX ALU PZ
ALUKRAFT, ALUKRAFT PRO
VAPOUR CONTROL LAYERS, VAPOUR

Yorum Yap

Adınız:


Yorumunuz: Not: HTML'ye dönüştürülmez!

Oylama: Kötü           İyi

Doğrulama kodunu giriniz:



Etiketler:
Tadilat Dekorasyon Yenileme Inovasyon Danışmanlık © 2019
Altyapı: OpenCart-TR